To turn HDCP detect back OFF, PUSH and HOLD the record button for 5 seconds and the red record ring will flash once. To turn HDCP detect ON, PUSH and HOLD the record button for 5 seconds. HDCP detection is disabled by default (this will ensure Xbox One game play can be recorded) This version now supports HDCP management.Audio processing improvements (your recordings will sound better).

Rocket recordings are now compatible with the VLC media player.For example, if you insert a 16GB NTFS formatted USB thumb drive, you can record about 8 hours of video in one file There are no file size limits for recordings with NTFS formatted USB thumb drives.This setting will then be remembered in standalone mode. You need to use Hauppauge Capture to set the input combination to HDMI video and LineIN audio.

Adds support for HDMI video and LineIn audio (for use with the Hauppauge Chat Cable).

Adds support for recording stand alone from video sources without audio (such as medical devices).

The microphone audio volume has been increased by 50%, fixing some problems with low microphone audio volume when recording standalone.

When you run Hauppauge Capture, you can make settings such as audio and video sources, bit rate and volume adjustments 'sticky' for use standalone. You can find your firmware version in Hauppauge Capture under 'Advanced' -> 'Firmware' USB 3.0 ports provide enough power for the Rocket. Alternately, you can plug just the black USB cable into one USB 3.0/3.1 port. Sometimes computers do not provide enough power on one USB 2.0 port and therefore we recommend using BOTH the red and black USB connectors. When connected to a PC, we recommend that you use both the BLACK and RED USB connectors on the 'Y' cable, plugged into two USB ports.

Note: if you have the Colossus 2, HD PVR 2 model 1512 or the HD PVR 2 GE+, if you have 5.1 channel AC3 audio from HDMI or optical audio, your recordings will have 5.1 channel AC-3 audio.

Hauppauge Capture supports the following products:

Once your PC is rebooted, you will see the Hauppauge Capture icon on your Windows desktop.

While rebooting your PC, if you have an HD PVR 2 or HD PVR Pro 60, power cycle by removing the power plug or USB cable from the back of the device for a few seconds and then plug it back in.

After installation, you will be asked to reboot your PC.

Windows Smartscreen is a new 'feature' in Windows 10 to prevent new updates from being installed automatically.

If you see the message 'Windows Protected Your PC, Windows Smartscreen prevented an unrecognized app.

Once Hauppauge Capture is downloaded, run the Hauppauge Capture installation from your 'Download' folder.Click the download button above and 'Save' Hauppauge Capture to your PC (do not select 'Run').Plug your Hauppauge product into your PC or power cycle your Hauppauge product ( if this is an upgrade to an existing version of Hauppauge Capture).

Hauppauge hd pvr software download